South Bend Lathe Parts Lists, By Dave Smith edit-05-02-09-s.wells
| Form # | Date | Description | Model | ||||||||||||||||||||||||||||||||
| 901G | 11/15/64 | 10K U. D.
Headstock 10K Horizontal Drive Headstock 10K Headstock (Reverse Bracket) 10K Tailstock |
Model A, B, & C | ||||||||||||||||||||||||||||||||
| 902D | 11/15/64 | 9" & 10-K Saddle & Compound Rest | - | ||||||||||||||||||||||||||||||||
| 9" & 10-K Apron | Model A & B | ||||||||||||||||||||||||||||||||||
| 9" & 10-K Apron | Model C | ||||||||||||||||||||||||||||||||||
| 903E | 11/15/64 | 9" & 10-K Gear Box | Model A | ||||||||||||||||||||||||||||||||
| 9" & 10-K Standard Change Gear | Model B & C | ||||||||||||||||||||||||||||||||||
| 904F | 10/1/66 | 9" & 10-K Horizontal Drive Unit | - | ||||||||||||||||||||||||||||||||
| 9" & 10-K Underneath Drive Unit | - | ||||||||||||||||||||||||||||||||||
| 905G | 11/15/64 | 10K Horizontal Drive Unit | Model A, B, & C | ||||||||||||||||||||||||||||||||
| 9" & 10-K Underneath Drive Unit | Model A, B, & C | ||||||||||||||||||||||||||||||||||
| 907J | 6/1/65 | 9" Handwheel Collet
Attachment 9" Handlever Collet Attachment Old Style 9" Handlever Collet Attachment New Style 10-K Handwheel Collet Attachment 10-K Handlever Collet Attachment Old Style 10-K Handlever Collet Attachment New Style |
Model A, B, & C | ||||||||||||||||||||||||||||||||
| 908C | 4-5-65 | Headstock | - | ||||||||||||||||||||||||||||||||
| 909E | 4-5-65 | Headstock | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 910D | 4-5-65 | Apron | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 911J | 4-5-65 | Saddle | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 912E | 4-5-65 | Tailstock | 10" | ||||||||||||||||||||||||||||||||
| Tailstock | 13", 14 1/2", 16", and 16/24" | ||||||||||||||||||||||||||||||||||
| 915B | 4-5-65 | Gear Box (Single Tumbler) | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 916A | 4-5-65 | Gear Box (Single Tumbler) | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 917C | 4-5-65 | Underneath Drive (Floor Type) | 10", 13", 14 1/2", 16" | ||||||||||||||||||||||||||||||||
| Underneath Drive (Floor Type) | 16/24" | ||||||||||||||||||||||||||||||||||
| 918B | 4-5-65 | Motor Cabinet Leg (Underneath Drive - Floor Type) | 10", 13", 14 1/2", 16" | ||||||||||||||||||||||||||||||||
| 920E | 4-5-65 | Bed and Legs | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 921F | 4-5-65 | Flat Belts Belt Cement Belt Splicing Clamps Lubricating Oil Leather V-Belts for Cone Pulleys Rubber V-Belts Chuck Wrenches Motor Pulleys |
|||||||||||||||||||||||||||||||||
| 922D | 4-5-65 | Taper Attachment | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 923E | 4-5-65 | Collet Rack Handwheel Collet Attachment |
10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 924D | 4-5-65 | Handlever Collet Attachment | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 924E | 4-5-65 | Handlever Collet Attachment | 10", 13", 14 1/2", 16", 16/24" with 1-1/16" Collet Capacity" | ||||||||||||||||||||||||||||||||
| Thread Dial | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||||
| 929C | 11-15-64 | Collet Rack Thread Dial Thread Cutting Stop Plain Carraige Stop Micrometer Carriage Stop |
9" & 10-K" | ||||||||||||||||||||||||||||||||
| 933A | 4-5-65 | Micrometer Carriage Stop | 10", 13", 14 1/2", 16", 16/24", 17" | ||||||||||||||||||||||||||||||||
| Ball Bearing Live Centers | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||||
| 937C | 11-15-64 | Handlever Turret | 9", 10-K, 10" Reg. & 13" | ||||||||||||||||||||||||||||||||
| 938B | 11-15-64 | H. L. Double Tool Cross Slide | 9", 10-K, 10" Reg. | ||||||||||||||||||||||||||||||||
| 939C | 4-5-65 | Milling Attachment | 9", Lt. 10, 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 940A | 4-5-65 | Four Position Carriage
Stop Four Position Cross Slide Stop |
9", Lt. 10, 10", 13", 14 1/2", 16", 16/24" & 2H | ||||||||||||||||||||||||||||||||
| 941A | 4-5-65 | Telescoping Jaw Follower
Rest Regular Follower Rest |
9", Lt. 10, 10", 13", 14 1/2", 16", 16/24" & 2H | ||||||||||||||||||||||||||||||||
| 942A | 4-5-65 | Regular Steady Rest | 9", Lt. 10, 10", 13", 14 1/2", 16", 16/24" and 16" and 16/24" Extra Large | ||||||||||||||||||||||||||||||||
| 942B | 12-23-80 | Steady Rest | 10-K, 10", 13" | ||||||||||||||||||||||||||||||||
| 943A | 4-5-65 | Telescoping Jaw Steady Rest | 9", Lt. 10, 10", 13", 14 1/2", 16", 16/24" and 16" and 16/24" Extra Large | ||||||||||||||||||||||||||||||||
| 944A | 4-5-65 | Square Turret Tool Block | 9", 10-K, 10" , 13", 14 1/2", 6", 16/24", 17" | ||||||||||||||||||||||||||||||||
| Square Turret Tool Block for Double Tool Cross Slide | 9", 10-K, 10", 13", 16", 2H" | ||||||||||||||||||||||||||||||||||
| 946A | 4-5-65 | 10 in 1 Tool Block | 9", Lt. 10, 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 948D | 4-5-65 | Compound Rest Top | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 960C | 11-15-64 | 9" & 10-K Compound
Rest Top - Large Dia. (1 3/4") Collar 9" & 10-K Cross Feed Screw - Large Dia. (1 3/4") Collar |
Model A, B, & C | ||||||||||||||||||||||||||||||||
| 961A | 4-5-65 | Type D1 Cam Lock
Headstock Spindle (Size-4") Type L Long Taper key Drive Headstock Spindle (Size-00) |
10", 13", 14 1/2", 16", 16/24", 2H" | ||||||||||||||||||||||||||||||||
| 968 | 4-5-65 | 27 Threads Per Inch | all | ||||||||||||||||||||||||||||||||
| 978A | 4-5-65 | Saddle - replacement ball thrust bearings on taper att. | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 979 | 4-5-65 | Turret Base / Turnstile - Hand Operated | 13" | ||||||||||||||||||||||||||||||||
| 980 | 4-5-65 | Turret Ram and Head | 13" | ||||||||||||||||||||||||||||||||
| 981 | 4-5-65 | Turret Apron | 13" | ||||||||||||||||||||||||||||||||
| 982 | 4-5-65 | Apron Turnstile | 13" | ||||||||||||||||||||||||||||||||
| 983B | ? | Serial number locations | 13" | ||||||||||||||||||||||||||||||||
| 987A | 4-5-65 | External Grinder | 9", 10-K, 10" , 13", 14 1/2", 6", 16/24", 17" | ||||||||||||||||||||||||||||||||
| 988A | 4-5-65 | Internal Grinder | 9", 10-K, 10" , 13", 14 1/2", 6", 16/24", 17" | ||||||||||||||||||||||||||||||||
| 992C | 4-5-65 | Apron Toggle-Cam Operated Clutch | 10", 13", 14 1/2", 16", 16/24" | ||||||||||||||||||||||||||||||||
| 999 | 4-5-65 | 9 & 10-K End Gear Guard | Model A, B, & C | ||||||||||||||||||||||||||||||||
| 1038 | 4-5-65 | Care of Machine Tools That Are Not in Use | |||||||||||||||||||||||||||||||||
| 2000 | 10-1-65 | Back Gear and Eccentric Shaft | 9", 10-K, 10" , 14 1/2" | ||||||||||||||||||||||||||||||||
| 2002 | 4-5-65 | Headstock Spindle Sleeve Bearings Assembly & Adjustment | 10", 13", 14 1/2", 16" | ||||||||||||||||||||||||||||||||
| 2003-p1 | 6-1-65 | Remedy a Sticky Clutch | 10", 13", 14 1/2", 16" | ||||||||||||||||||||||||||||||||
| 2003-p2 | 6-1-65 | Toggle Cam Clutch Adjustment | 10", 13", 14 1/2", 16" | ||||||||||||||||||||||||||||||||
| 6503 | 10-67 | Lubrication Chart | 10", 13", 16", 16/24", and 10", 13", 16" Turret Lathes
| ATT-7 |
3-13-39 |
Fitting a Milling
Attachment to South Bend lathe |
ATT-21 |
3-25-47 |
Tapped Holes for Milling
Attachment |
ATT-94 |
3-21-46 |
9 & 10-K Lathe
Thread Dial - Installation and Use |
ATT-95 |
4-1-46 |
10 to 16" Lathe Thread
Dial - Installation and Use |
ATT-137 |
11-26-51 |
How to Mount Belt Guard
on 9" Small Horiz. Drive Standard |
Bulletin
5910A |
| Cutting Tools Data -
Angles and Applications |
Instructions on Use of Cutter Bit Grinding Block EP-139-4 |
| 10K Horiz. Drive
Mounting Instructions |
PA4530K2 |
| Horiz. Belt Guard
Assembly |
|
A note on copyright:
I am posting these documents after careful consideration of US Copyright laws. In my interpretation of the laws, the documents should be considered to be in the public domain becuse: A) they show no indication of being registered with the US Copyright department, and B) They are more than 28 years older than the date printed on them. I plan to provide links to my information at a future date, but would welcome comments and concerns should you wish to share them in the meantime.
By: David Smith