Back       Parts Prints e-mail: wswells@earthlink.net      
         
         
                   
      Description        
                 
         
  View   1925 South Bend 15-16" QCGB Print No. 118, TIF image, 5.74mb from Neil Tyson     
           
  View   1933 South Bend Mounting & using a milling attachment, ATT-10, TIF image, 9.6mb, Neil Tyson
   
           
  View   1936 South Bend 16" Horizontal Pedestal Motor Drive No. 910, 9.23mb, TIF image, Neil Tyson    
           
  View   1936 South Bend 16" Headstock Style H4-H5, No. 21, TIF image, 6.5mb, Neil Tyson
   
           
  View   1936 South Bend 9" to 16" Oiling Chart Print, TIF image, 3.59mb, Neil Tyson    
           
  View   1937 South Bend 15-16" TA Crossfeed Screw No. 860, TIF image, 6.3mb, Neil Tyson
   
           
  View   1937 South Bend 15" Crossfeed Screw No. 52, TIF image, 6.0mb, Neil Tyson     
           
  View   1946 South Bend 16" Stud Gear Print, TIF image, 2.28mb, Neil Tyson    
           
  View   1948 South Bend 16" Crossfeed Nut Mounting Screw PN 66FH1, TIF image, 2.4mb, Neil Tyson    
           
  View   Workshop Model A Saddle Lock      
           
  View   Workshop Small Dial Handle Shaft      
           
  Pdf   Workshop Cross Slide Nut Retaining Screw and Pin, by Dave Hutchins       
           
  View   SBL Collet Dimensions       
           
  View   3C Collet Adapter, by Mike Ruffin      
           
  View   3C Collet Tube, by Mike Ruffin      
           
  View   3C Collet Tube Sleeve, by Mike Ruffin       
           
  View   1-1/2 8tpi Spindle Nose Protector, by Mike Ruffin      
           
  Pdf   1-3/8 10tpi Chuck back plate for the 8 inch JR or 9 inch Workshop 405,  by Dennis Turk      
           
  View   10L Crossfeed screw with taper - old style 7/16 shaft w/o bearings - TJ's print w/ revisions by SW