10947TKX14,
4/12/1966,
13" X 5',
Catalog No. CL8145-B Tool room lathe,
The data plate on the quick change has been replaced,
it's black and the catalogue number is unstamped.
The X I was told is due to the 5ft bed being hardened,
she left the factory with a taper attachment, which as you know I have.
She was shipped on April 12th 1966 to the Packard Machinery Co.,343 Main St. Cambridge 42 MASS.
The build card at Leblond just says shipped to "Packard"
but there is a plate screwed to the gear cover with the addresse listed above.
She alledgedly was in a school and has the battle scars and unusual wear to prove it.
K= Quick Change Gear (QCG),
Friction Feed Apron,
Underneath Motor Drive (UMD),
X=Special features.
PM Member.