19786R,
Voltage: 220-440,
3 Phase, 60 Cycle,
Built 1975,
Swing over bed: 10-1/8" ,
Swing over cross slide: 5-7/8",
Distance between centers: 20",
Hole through spindle: 1-3/8",
Maximum collet capacity: 1-1/16" (5C),
Spindle nose: 2-1/4"- 8,
Headstock & tailstock taper: #2MT,
Spindle speeds: 55 - 1400 RPM ( 12),
Threading: 4 to 480 TPI (12),
Longitudinal feeds: .0007" to .0836",
Cross feeds: .0003" to .0303",
Estimated weight: 1000 lbs.,
3-Jaw Chuck,
4-Jaw Chuck,
5C Handwheel Drawbar,
Assorted 5C Collets,
Thread Dial,
Swing Down Chuck Guard,
Follower Rest,
Micrometer Carriage Stop,
Cabinet Stand,
Flame Hardened Bedways.