10" pedal lathe. There is a #3 about 3/4" below the 736.
The screw chart on the leg says South Bend Machine Tool Co.
It came with 5 change gears, drive plate, some tool holders,
a 1902 pat. Jacobs chuck, some countershaft pulleys,
and a interesting little Skinner 4 jaw chuck.
The Skinner is 5 1/4" diameter, No. 804, 1882 pat.
and has a lever on the back that you move to change
it from an independent to a universal chuck. It touts 'Flush Screws' on the front writing.