74918,
13-inch X 5-foot,
QCG,
UMD Floor Lathe,
Shipped 1/30/1937,
Sold to Homelite Corporation of Port Chester, NY.,
Jobber was A. C. Colby Machinery Company of NYC,

The lathe has a steady rest, follow rest, a 3-jaw and some collets,
the collet draw bar is missing and I will have to make one.
The previous owner removed the motor from the UMD,
I have located the 2-step drive pulley and fit a key to the keyway,
not looking forward to the gymnastics of trying to attach the motor to the plate!
The motor is a General Electric Induction Motor, 3 phase rated at 1.5HP,
it turns at 1200 RPM. The machine is in very nice condition,
it needs a good cleaning, some paint and proper lubrication,
I am in the process of building a Rotary Phase Converter that will run my 13-inch & 9-inch SBL,
and my Marena Milling machine.