94772,
10L x 3’,
Catalog No. 987-Y,
Stamped letters in lower case 'dww'.
The letters 'JAN' appear under the serial number.
The description plate calls it a 10-inch L, with model number 987-Y.
The spindle thread is 2-1/4" - 8-tpi.
The lathe is on cast-iron leg stands with no tray or table (open underneath).
There is a quick-change gearbox (single arm),
Power feed in both directions on the apron/saddle.
The counter shaft would have been floor mounted,
but is now homemade replacement.
The spindle bearing caps are marked 17 underneath.
They appear to be all steel grooved super finished.
The lathe has oil cups each end of the headstock.