| Link |
Description |
Contributed By: |
|---|
| Print |
1920's South Bend Lead Dauber for Tailstock. |
Unk |
| Print |
1925 South Bend 15-16" QCGB Print No. 118, TIF-image-5.74mb. |
Neil Tyson |
| Print |
1933 South Bend Mounting and using a milling attachment, ATT-10, TIF-image-9.6mb. |
Neil Tyson |
| Print |
1936 South Bend 16" Horizontal Pedestal Motor Drive No. 910, TIF-image-9.23mb. |
Neil Tyson |
| Print |
1936 South Bend 16" Headstock Style H4-H5, No. 21, TIF-image-6.5mb. |
Neil Tyson |
| Print |
1936 South Bend 9" to 16" Oiling Chart Print, TIF-image-3.59mb. |
Neil Tyson |
| Print |
1937 South Bend 15-16" TA Crossfeed Screw No. 860, TIF-image-6.3mb. |
Neil Tyson |
| Print |
1937 South Bend 15" Crossfeed Screw No. 52, TIF-image-6.0mb. |
Neil Tyson |
| Print |
1946 South Bend 16" Stud Gear Print, TIF-image-2.28mb. |
Neil Tyson |
| Print |
1948 South Bend 16" Crossfeed Nut Mounting Screw PN 66FH1, TIF -image-2.4mb. |
Neil Tyson |
| Print |
Workshop Model A Saddle Lock |
Unk |
| Print |
Workshop Cross Slide Nut Retaining Screw and Pin. |
Dave Hutchins |
| Print |
SBL Collet Dimensions. |
South Bend Lathe |
| Print |
3C Collet Adapter. |
Mike Ruffin |
| Print |
3C Collet Tube. |
Mike Ruffin |
| Print |
3C Collet Tube Sleeve. |
Mike Ruffin |
| Print |
1-1/2 8tpi Spindle Nose Protector. |
Mike Ruffin |
| Print |
1-3/8-10tpi Chuck back-plate for the 8-inch JR or 9-inch Workshop 405. |
Dennis Turk |
| Print |
10L Crossfeed screw with taper - old style 7/16 shaft w/o bearings - TJ's print w/ revisions by WSW. |
TJ Schmidt |
| Print |
10L Crossfeed screw with taper - new style 3/8 shaft w/ bearings - owner mesurements. |
Unk |
...
Workshop
