| Link: |
Description: |
Contributed By: |
|---|
| Crossfeed-9W |
Large dial upgrade for the 9 inch Workshop 405 crossfeed with bearings. |
Jim Benjamin |
| Compound-9W |
Large dial upgrade for the 9 inch Workshop 405 compound with bearings. |
Jim Benjamin |
| 10L Crossfeed Backlash |
Jim corrects the backlash in his 10L Crossfeed by adding bearings. |
Jim Benjamin |
| Crossfeed-9N |
Large dial upgrade for the 1936 South Bend Workshop 415 crossfeed. |
Ed Goodwin |
| Compound-9N |
Large dial upgrade for the 1936 South Bend Workshop 415 compound. |
Ed Goodwin |
| 10L Taper Crossfeed |
Revival and Improvement of the 10L Crossfeed Taper Screw. |
TJ Schmidt |
| Making Dial Collars |
Making Graduated Dial Collars. |
Mike Burdick |
| 10L Crossfeed Mount Bushing |
A photo essay on turning a 10L Large Dial Crossfeed Mount Bushing. |
Wally Murray |
| ML8 indicator |
Machining the MLA-8 Indicator Base / Saddle Stop. |
Paula Stephens |
| Dial Travel Indicator |
A Shop made Dial Travel Indicator Holder and Clamp, step by step. |
Nick Carter |
| MLA-9 Steadyrest |
Machining the MLA-9 Steadyrest Casting Kit. |
Jim Benjamin |
| Making Drive Pulleys |
Making South Bend Dual Drive Motor Pulleys. |
Bob Wright |
| 10L index plate |
Refurbishing a 10L index plate. |
Jim Kull |
| 13-inch Lathe Resto |
Ryan Documents his 13-inch Lathe Revival, a grear source of information for reference material. |
Ryan Battelle |
...
Workshop